Simply Better

• Everyday cleaning, simply wipe with a soft cloth with soap and water
• Option 2 – Rubbing alcohol and water solution or mild household cleaners such as:
  • Windex, 409, Fantastic, Simple Green, etc.

Always use a non-abrasive cloth when cleaning to avoid dulling your surface.

Always wipe surface thoroughly dry to avoid streaking and film build up.

Oils on any counter can leave the finish looking messy, smudged and reflect light unpleasantly.

• Option 1 – Soap and water
• Option 2 – Use a mild, alcohol-based degreaser such as Simple Green All Purpose Cleaner or rubbing alcohol.

Staining resulting from cosmetic products can make anyone panic. Not to worry!

• Option 1 – Soap and Water
• Option 2 – Apply hydrogen peroxide at a maximum 30% concentration then rinse and wipe with water.
• Option 3 – Rubbing alcohol

Remove any residue from the hydrogen peroxide solution after cleaning to avoid damaging the finish.

Noticing metal marks on a quartz surface can often be confused for scratches. Such metal marks can be easily removed using simple methods. You can delicately rub a white latex eraser on the affected area. Once the stain is gone, clean the surface with one of the daily cleaning solutions as recommended above.

When cleaning any surface, the rule of thumb is to never apply pressure that is heavier than the natural weight of your hand. Otherwise, you can cause dull spots.

• Option 1 – Cleaning vinegar
• Option 2 – Non-abrasive scale remover solution

Scrape the hardened deposit off the surface using a plastic scraper or razor blade followed by one of the approved daily cleaning methods.

Matte finish surfaces require more daily maintenance than polished surfaces. Finger prints, wet spots, metal marks, and other signs of daily living show more on these types of surfaces. Apply the same cleaning guidelines with more frequency and gentler cleaning movement. If necessary, use Simple Green to remove any difficult spots. Matte finishes are not recommended for high traffic areas.

Cutting Boards and Trivets –Quartz surfaces are heat- and scratch-resistant, but not heat and scratch-proof. Hot pans and heat-generating appliances (frying pans, baking pans, electric skillets crock-pots, etc.) can damage your solid surface due to excessive heat. To prevent damage caused by heat, ALWAYS USE A TRIVET WITH LEGS to protect the surface. Always use a cutting board. Never chop or slice food directly on your countertops.

• If any of the substances mentioned below come into contact with your quartz, rinse the exposed surface immediately and thoroughly with water.
• No Wax or Polish Necessary - Because it is nonporous, quartz does not require sealants or waxes. Quartz keeps its lustrous gloss and ultra-smooth surface without polishing or applying sealant.
• Do Not Use Bleach - Avoid using cleaners that contain bleach. Always follow the cleaner manufacturer’s use instructions and exercise proper care when handling and storing any cleaning products.
• Avoid High-pH Cleaners - Casual exposure to alkaline solutions, such as diluted bleach, will not damage quartz. Highly alkaline (high pH) cleaners, such as oven cleaners and concentrated bleach, are not recommended.
• Removing Cooking Grease - When grease from cooking is an issue, use Greased Lightning^™, or a comparable degreasing product, to help loosen and remove the grease from the surface. Follow the cleaner manufacturer’s instructions for use.
• Permanent Markers - Keep permanent markers and inks away from your countertops. Should these materials come into contact with the surface, clean first as outlined above in the Daily Cleaning section. If the stain persists, moisten a cloth with Goo Gone^®, or a comparable product, and rub it into the stain. Rinse thoroughly with warm water to remove any cleaner residue.
• Keep Solvents and Powerful Chemicals off of the Counter - Avoid exposing quartz to strong chemicals and solvents, especially paint removers or furniture strippers containing trichlorethane or methylene chloride. Keep nail polish remover, bleach, detergent, permanent markers or inks, and oil soaps away from your quartz.
• Heat Damage Prevention - To maintain the beauty of quartz, do not place hot skillets or roasting pans directly onto the surface. We recommend the use of trivets and hot pads.
• Dealing with More Difficult Spills and Materials - Materials that harden as they dry (such as gum, food, grease, nail polish or paint) are especially tenacious. Remove these by gently scraping away the excess with a plastic putty knife.